Storage water heaters

Features:

01. HIGH QUALITY TANK

Metalac water heater tanks have enamel coating, which protects against corrosion and provides high level of water hygiene. In the production process electrostatic process of enameling is applied, which secures even coating, according to standards. Metalac water heaters are also available in versions with stainless steel tank, which provides maximum protection against corrosion (only available for Standard, Practic, Slim and Comby water heaters).

02. POLYURETHANE INSULATION

Metalac water heaters have insulation of high quality, environmentally friendly polyurethane foam, thickness 17 to 40 mm. Polyurethane foam provides minimum heat loss and energy savings.

03. SAFETY VALVE

Metalac water heaters are supplied with safety valve, whose primary function is to prevent high pressure due to water heating. Our water heaters are designed for a working pressure of 0.6 MPa (6 bar), and tested at 1.2 MPa (12 bar).

04. Mg ANODE

Metalac water heaters are fitted with Mg anode that provides long-lasting protection against corrosion. Mg anode is placed in the bottom part of the water heater, which allows its easy replacement.

05. UNIVERSAL BRACKET

Thanks to the wide attaching span (130 to 360 mm), which corresponds to most of the water heaters in the market, universal bracket allows easy mounting in case of replacement of the water heater. In this way, you avoid drilling extra holes in your bathroom.

06. THERMOREGULATION

Metalac storage water heaters are available in two versions – with internal and external temperature control. Water heaters with internal control are configured to heat the water up to 55-60 °C, which is an optimal temperature in terms of energy savings and scale formation.

COMPONENTS   1. Electric heater 2. Mg anode 3. Hot water - outlet pipe 4. Cold water - inlet pipe 5. Tank 6. Thermal insulation 7. Flange 8. Thermostat 9. Safety valve 10. Thermometer 11. Protection cap 12. Shell 13. Bracket 14. Thermoregulator